AUTOMATOR II POWDER METAL AUTOMATION PRESS CONTROL:
is a full featured Powdered Metal Press Control. Order the control configured exactly how you want it. Select only the option you need. Becouse the AutomatorII is field upgradeable, most options can be added in the field when you need them.
..
Start with these standard features then choose only the options you need.....
Remote 15" inch color touch screen operator interface with advanced features.
Programmable automation inputs. 
Programmable automation outputs. 
24VDC at 1A for sensors and aux equipment.
Heavy duty industrial resolver.
Multiple options like Tonnage Monitor, Shoe Feed interface, I/O, OSHA compliant safety control and much more. See Options below

OSHA, ANSI, MPIF and CSA compliant Press Control.
8, 16 or 32 Safety Input Card.
Programmable Limit Switch Output Card.
Load Monitor Card.
Ball Screw Feeder.
Multi-Axis Controller.
Ethernet.
More than 81 inputs/outputs.
Rack Extension

Start with these standard features then choose only the options you need.....

• The rack system consists of a power block with 5vdc, 24vdc and relay modules with a cpu module in the main block along with four open slots for optional modules.
• Plug in terminal blocks w/coil and contact status indicators.
• Chain break detector and programmable motion detect.
• Set-up and remote reset inputs.
• 250 job memory regardless of options (500 optional).
• Real Time Clock.
• Programmable High and Low RPM limits.
• Tool List with programmable tool number and name.
• Real Brake Stop Time monitor with 90° stop time test.
• Hour Meter.
• Stroke and Part counter with programmable preset.
• Total hits counter with each job.
• Relay Status LED'S.
• Opticaly Isolated Inputs and Outputs.

Remote 15" inch color touch screen operator interface with advanced features.

• 15”Color Capacitance Touch Screen.
• Ethernet connections; USB Ports and RS 232.
• Additional connections for mouse, keypad, printer and audio output.
• Single communication cable for easy remote installation.
• Displays position and tach.
• Enhanced on screen diagnostic status of inputs, outputs, resolver and more.
• Timed Stamped History of Faults.
• Timed Stamped History of User Log In.
• Twenty Six Programmable Password Codes with Log In.
• Comprehensive Security Control over each input and output.
• On screen help and much more.
• Set Up Information.

Programmable automation inputs. 

• Monitor Static Events.
• Names are programmable.
• LInk to Automation Outputs.
• Summary Screen.

Programmable automation outputs. 

• Three Timers.
• Five Programmable Limit Switches.
• Choice for each output to make global to all jobs.
• Names are programmable.
• Output Notes.
• Summary Screen.

OSHA, ANSI, MPIF and CSA compliant Press Control.

• Safety Clutch/Brake Control Card.
• Front and Rear Guard Inputs with Muting.
• Interrupt Stroke Mode.
• Multiple Operators.
• Continuous Delay Input with Indicator Light Input.
• Micro Inch.
• Speed Compensated Top Stop.

8, 16 or 32 Safety Input Card.

• 8, 16 or 32 Inputs Each with Two Programmable Windows.
• Static or Cyclical.
• Fault Output to Immediate Stop, Top Stop, Aux1 or Aux 2.
• Names are programmable.
• Input Notes.
• Summary Screen.

Programmable Limit Switch Output Card.

• Up to 24 PLS Outputs.
• Output Notes.
• Summary Screen

Load Monitor Card.

• Programmable Monitoring.
• Each Point and Total Tonnage Display.
• High and Reverse Tonnage Display.
• Good Part Foot Print.
• Low Alarms May be Disabled.
• Up to Four Points with Sensors and Mounting Hardware.

Ball Screw Feeder.

• Ball Screw Feeder
  • Programmable Start Position and End Feed Cycle
  • Programmable Start/Push Crank Angle
  • Feed Speed Control
  • Programmable Bump Position with Separate Speed Control
  • Programmable Shake Position
  • Programmable Shake Length and Number of Shakes

Multi-Axis Controller.

• Multi-Axis Controller.
  • Up to Twelve Axis (Top Ram-DP Fill-DP Mold Stop-DP
     Ejection-CR Mold Stop-Under Fill-etc).
  • Programmable Adjust.
  • Programmable Pre Set.
  • Programmable Hi and Low Limits.
  • Programmable Drift.

Ethernet.

• Ethernet.
  • Press Name and Number.
  • Current Job Number, Tool Number and Tool Total Hits.
  • Parts Counter and Batch Count.
  • Graphic Parts Count and Batch.
  • Fault Alarms and Fault History with Time Stamp.
  • Strokes Per Minute.
  • Brake Monitor.
  • Hour Meter.
  • Press Operation Mode.
  • Production Graph
  • Programmable Names for each press.

More than 81 inputs/outputs.

• Automator II has in excess of 81 inputs/outputs that you can easily trouble shoot directly from the operator interface screen with the status displays of any module. An indicator for each terminal on a module I/O will activate when the I/O is active. You can also see the last number of faults that occurred on each module.

Rack Extension

• A Rack Extension is available with five open slots for more optional modules.